Winkelwagen

0 producten
Sluiten

Winkelwagen is leeg

U heeft geen producten in uw winkelwagen.

Verder winkelen

Auto gevonden

Uw producten worden opgehaald. Een moment geduld...

Found vehicle

#

#

#

Vind producten voor jouw voertuig

Mijn garage

Leeg
Auto toevoegen
Sluiten
Auto toevoegen

GFB Dumpvalve + TMS VAG 2.0 TFSI/TSI Diverter Upgrade

Vervangt de originele kunststof dumpvalve met behoud van behuizing. nr. 1 upgrade na chiptuning VAG 2.0 TFSI/TSI

Verzendopties

Normale prijs: € 149,00
Bij ons slechts: € 115,00
Incl. 21% BTW
Normale prijs: € 149,00
Bij ons slechts: € 115,00
Incl. 21% BTW

Go Fast Bits - Performance Parts

Deze fabrikant uit Australie levert hoogwaardige performance parts. De naam zegt genoeg, alles om uw auto sneller te maken! Voor levering putten wij uit onze eigen voorraad en uit het centrale Europees magazijn. Mocht een onderdeel onverhoopt toch niet voorradig zijn dan kan de levertijd uitlopen.

Go Fast Bits DV+

Introducing the new DV+ for late-model VAG and Euro applications! GFB’s DV+ solution couldn’t be simpler - keep what works and replace what doesn’t.

* Retains the factory solenoid coil for seamless integration
* Replaces plastic valve parts with metal for reliability and strength on chipped engines
* Direct-fit replacement with GFB’s TMS benefits
* Exclusive “pilot-actuated” valve mechanism for rapid response at high boost

GFB expands the DV+ range with a direct-fit solution for the weak factory diverter valve used on many European vehicles. The solenoid coil itself from the factory-fitted valve is great (the ECU opens it faster than any pneumatic valve so why replace it?), but the weak point however is the valve mechanism itself. So GFB’s DV+ solves this problem by replacing just the valve parts with an anodised billet aluminium housing fitted with a brass piston machined to exacting tolerances. The end result is sharper throttle response, lightning-fast valve actuation, and it will hold as much boost as you can throw at it.
Other manufacturers’ products involve replacing the entire system with a traditional pneumatic valve, requiring long vacuum hose runs, additional parts for tapping into the intake manifold vacuum, plus either a different solenoid valve to actuate the pneumatic valve or a ballast resistor to plug into the OE wiring loom. All these additional items result in a product that is slower, less responsive, more expensive and takes much longer to install. GFB’s DV+ solution on the other hand is more responsive, less expensive, easier to install, and doesn’t cause compressor surge/turbo flutter. Oh, and it doesn’t require different springs or frequent re-builds.

Suits all VAG 2.0T FSI and TSI engines fitted to:
* Audi A3/S3 8P (2003-2013)
* Audi A4 B7 (2005-2008)
* Audi TT Mk2 (2006-2013)
* Seat Leon FR (2005-2013)
* Skoda Octavia vRS (2005-2013)
* VW Golf GTI V (2003-2008)
* VW Golf GTI MkVI (2008-2013)
* VW Golf R MkVI (2008-2013)
* VW Scirocco R
* VW Jetta GLI MkV (2005-2010)
* VW Passat B6 (2005-2011)

Many late-model European cars use ECU controlled solenoid-type diverter valves. This is a good concept because the valve can react very quickly and it only opens when it needs to. However, there are some problems with these valves. There are typically two types of solenoid-actuated diverter valves found standard on VAG and European cars, both of which have their shortcomings.
Additionally, in both cases, the solenoid on the OE diverter is directly connected to the valve mechanism, which is not ideal because neither it nor the return spring are strong enough to open and close the valve reliably at high boost. With problems like this, you can see why other aftermarket manufacturers assume the best solution is to replace the factory diverter entirely. Unfortunately though, whilst their replacement kits might be stronger than the factory diverter, their slower response speed and lower flow do not justify the extra cost and complexity - more of a compromise than a solution. GFB has taken a different approach to deliver a complete solution that solves existing problems and improves performance, without compromise or a hefty price tag.



The DV+ addresses the factory valve problems with a very simple and elegant solution. Keeping the factory solenoid retains all the benefits of the stock system, and replacing the valve parts with indestructable metal components ensures strength and reliability no matter how much boost you run.

That's not all. Rather than using the solenoid to directly actuate the valve, we’ve introduced a unique “pilot-actuation” system. This means the solenoid controls the air pressure that is used to open and close the piston, so it doesn't matter how much boost you push through it, the DV+ will open and close reliably without ever exceeding the solenoid’s capability.

This feature also improves on the factory system by opening the valve progressively in response to boost pressure, so it only opens as much as required to get the job done (the factory valve simply opens and shuts, it cannot partially open if boost pressure is low), resulting in better throttle response.

Specificaties

  • EAN Code Nee
  • MPN (Manufacturer Part Number) T9351
  • OEM nr's 221266
  • Montage Plaats Nee
  • uitvoering Nee
  • Artikel Nummer GFB T9351
  • Kleur Nee
  • Materiaal Nee
  • Fabrikant Go Fast Bits
  • Aantal in verpakking: Nee
  • Keurmerk: Nee
  • Fabrieksgarantie: 1 jaar

0 beoordelingen

Schrijf je eigen review

Wat is jouw ervaring van de GFB Dumpvalve + TMS VAG 2.0 TFSI/TSI Diverter Upgrade?

Prijs
Kwaliteit

9.1

97% beveelt ons aan
1861 beoordelingen
USPS Voorwinden Parts

Online bestellen bij Voorwinden Parts betekent voor onze klanten:

Wij gebruiken cookies. Door deze website te gebruiken accepteert u dat we cookies gebruiken om uw gebruikerservaring te verbeteren.Meer informatie